Then plug the adapter into the Sur Ron Battery: This should start charging immediately and you want it to build up enough charge that you can either charge it fully with that charger or so you can use your Sur Ron stock battery charger again. Then set the charger to 2amp for a slow trickle charge. Once you receive the charger and adapter, connect the adapter to the charger and plug it into the wall The second method to get your Sur Ron Battery to start taking a charge is to purchase the Light Speed Adjustable Trickle Charger and a Light Speed Sur Ron Adaptor: If the jump-start method doesn’t work and your battery and charger seem completely dead it’s time for the second method. Check the Sur Ron Battery and you should now see the gauge at 0 to 5% and it should take a charge from then on.This should start the charger and the fan should turn on. Step 5 – Once it goes from flashing red to solid red unplug it from the wall and immediately plug it back in.Step 4 – Let that light keep flashing red for about 20 to 60 seconds until it turns to a solid red light.Step 3 – Once you see the light flashing green and red unplug from the wall again and quickly plug it back in.If it doesn’t, unplug and immediately plug in again. Step 2 – Plug the charger into the wall outlet and wait until you see the charger flash red and green.Step 1 – plug the Sur Ron Charger into the battery.The first fix is the jump-start method which you may need to try a few times to get it to work: There are two fixes that we know of that will kick start a dead battery. The second method is to use a trickle charger to start the charge and to get enough charge that your stock charger will be able to charge it. The first method is the Jump Start method which requires you to plug in and unplug your charger in sequence until the charger recognizes your battery. There are two methods that we know of that might help you get your battery charged again. There are times when your Sur Ron Charger will not charge your dead or almost dead battery. Unfortunately, at this time, there are no fast or turbochargers available for the Sur Ron Trouble Shooting Your Sur Ron Battery Charger There are times when you will want to charge your Sur Ron faster. This LightSpeed charger has been used by Sur Ron owners to Jump-start dead Sur Ron Batteries that won’t charge on the stock charger. The LightSpeed 2A to 12A Adjustable Charger combined with the LightSpeed Sur Ron Adaptor is another option. However, often, this might be due to the battery not actually at 100%, and it might take another 30 to 60 minutes to be 100%.Ĭheck Price Light Speed Adjustable Charger NOTE: some users report their charger does not show the green light or does not turn off when the battery says 100% fully charged. Listen for the fan to come on and confirm whether the red light is on or flashing.Plug the charger into the battery port and make sure it fully clips in.Open the battery lid and turn off the breaker.Sur Ron Battery Charging While In The Bike Secure the battery port cap and your battery is ready to go (NOTE: Some experts recommend waiting 30 to 60 minutes after a charge to let your battery cool down before you use your bike.).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |